There was a problem loading the comments.

Connecting Your Airpods to a Device

Support Portal  »  Knowledgebase  »  Viewing Article

  Print
Put your AirPods into Pairing Mode
  1. Put your AirPods into the Charging Case.
  2. Keep the lid of your Charging Case open.
  3. Press and hold the setup button on the back of the Charging Case.
  4. When the status light begins to flash white, your AirPods are in Bluetooth pairing mode.

Enable Bluetooth on the Phone and connect to the AirPods
  1. Step 1: Select the Menu soft key at the bottom of your display screen.
  2. Step 2: Use the navigation keys to navigate to the ‘Basic’ setting.
  3. Step 3: Press the down ‘v’ navigation key and navigate to #7-Bluetooth and press the OK key in the center of your navigation arrows.
  4. Step 4: Once in the Bluetooth menu – use the navigation arrows ‘>’ to turn ON the Bluetooth and press the OK key in the center of your navigation arrows.
  5. Step 5: Navigate to #2 ‘Paired Bluetooth Device’ and then press the soft ‘Scan’ key at the bottom of your display screen and scan for your device.
  6. Step 6: Once your Bluetooth headset is discovered select the soft ‘Connect’ key to connect the device to your phone.

Share via
Did you find this article useful?  

Related Articles

© CallHarbor