What is a Fax Bridge?

A Fax Bridge is an adapter connected to a fax-enabled printer. The fax bridge allows sending and receiving faxes with the printer.

Front

Back

 

To Plug In the Fax Bridge:

1. The power adapter, which may be a Yealink power adapter, should be plugged into the PWR port and a wall outlet

Wall Outlet:

Power Adapter:

2. An ethernet cable should be plugged into the WAN port and a network port or switch with internet access. If you don't know a port or switch to use, contact your IT manager.

Network Port:

Switch:

Ethernet Cable:

3. Connect the RJ11 telephone cable to the FAX port and Line 1 on the printer

Line 1:

RJ11 cable:

4. The PWR and SYS lights will light up green once the fax bridge is fully powered on and ready to be used. 

5. Send a test fax. Please reach out to CallHarbor Support for the test fax number.

If the PWR and SYS lights do not light up green, or your test fax fails, please contact CallHarbor Support.